leather punch, revolving leather punch

Deluxe Semi-Pro Revolving Leather Punch (Shown)
#25267 $15.95 plus/$7.50 shipping (For Non-Commercial Use)

This fantastic and handy leather punch is the perfect solution for punching holes in dog leashes, leather belts, horse tack, shoes,
sandal straps, skates, boots, gloves, shoe insoles etc...
Chrome plated steel, this (6) hole - leather punch will last a lifetime. The leather punches revolve on a spindle for easy hole size selection.
Our standard leather hole punch tool.

Holes Sizes in Detail
Punch Number	#0	#1	#2	#3	#4	#6
Fraction Size	5/64"	3/32"	7/64	1/8"	5/32"	3/16"
Decimal Size	.078"	.093"	.109"	.125"	.156"	.187"

Professional Revolving Leather Punch We Offer Two Leather Punches - The Difference Being the Hole Size Selection
#25171 $89.00 plus $7.50 shipping (Hole Sizes 1,2,3,4,5,6 See Chart Below)
#31709 $89.00 plus $7.50 shipping (Hole Sizes 0,1,2,3,5,7 See Chart Below)
(For large quantity industrial hole punching - Auto Industry, Craftsmen, Serious Leather Crafting, Horse Stables etc...)

This is the best revolving punch made - period. The frame is made of forged steel - highly polished.
Cutting tubes are turned from special carbon tool steel and threaded for easy replacement.
Each punching tube is individually heat treated for hardness.
The reach or cutting distance from the cutting tube to the back of the jaw is 1-1/2". Weight is 14 oz.

Leather Punch #25171 Holes Sizes in Detail
Punch Number	#1	#2	#3	#4	#5	#6
Fraction Size	3/32"	7/64	1/8"	5/32"	11/64"	3/16"
Decimal Size	.093"	.109"	.125"	.156"	.171"	.187"

Leather Punch #31709 Holes Sizes in Detail
Punch Number	#0	#1	#2	#3	#5	#7
Fraction Size	5/64"	3/32"	7/64	1/8"	11/64"	13/64"
Decimal Size	.078"	.093"	.109"	.125"	.171"	.203"

Click on the image for a larger View (a separate window will open)

Professional "Affordable" Revolving Leather Punch
#29086 $39.95 plus/$7.50 shipping (For large quantity industrial hole punching - Auto Industry, Craftsmen, Serious Leather Crafting, Horse Stables etc...)

An affordable professional revolving leather punch. The frame is made of forged steel - highly polished. Sharp cutting tubes.
The reach or cutting distance from the cutting tube to the back of the jaw is 1-1/2". Weight is 14 oz.

Holes Sizes in Detail
Punch Number	#1	#2	#3	#4	#5	#6
Fraction Size	3/32"	7/64	1/8"	5/32"	11/64"	3/16"
Decimal Size	.093"	.109"	.125"	.156"	.171"	.187"

Click on the image for a larger View (a separate window will open)

Heavy Duty Leather Shears (Gingher Pro)
#29087 $39.95 plus $7.50 shipping (For Serious Leather Crafting)

Heavy duty leather shears - cut leather, fabric, nylon webbing and heavy industrial materials with ease.
Rugged, stainless steel construction, the leather shears are extremely sharp (blunt-end design for safety).
Gingher knife-edge scissors and shears are ground with a very sharp edge and will cut through greater thicknesses of fabric
than will other scissors and shears. Because of their extreme sharpness the ghinger scissors should be used with care.

Sewing Awl
Item #22762
$17.50 with $5.00 Shipping

This unique American made wooden handled sewing awl is perfect for craft work as well as a wide variety of repairs. Indispensable for mending leather goods, camping gear, sports equipment, nylon sails, saddle and tack equipment, shoes and handbags. An essential tool for the handyman as well as the hobbyist and the outdoorsman. Comes with heavy duty thread and needles that store in the handle.

How to thread and use the awl
Unscrew the top of the awl handle to find needles, nut and wrench/screwdriver. With screwdriver end of wrench, unscrew the bolt holding the thread spool. Remove the spool from the awl and run the end of the thread through the chuck opening. Replace spool on awl. Put a needle in the chuck with needle groove on the same side that the thread comes off the reel. With the wrench, tighten the chuck with nut holding needle. Thread needle, being sure thread follows groove on needle.

1. Put the thread through the needle and extend the length to about 1/2 inch past the needle point. Hold forefinger loosely on reel so it will turn.

2. Insert threaded needle through material.

3. On opposite side of material, take the end of the thread and pull out to a length of about 18 inches, or twice the distance of the seam you wish to sew.

4. With loose end of thread in one hand, grasp awl firmly with the other. (Hold reel with forefinger so that it will not turn.) Withdraw awl from material so that there is 1 and 1/2 inches of thread between material and point of needle. In this position, release the reel and begin the second stitch by inserting the needle at the proper distance through the material for length of stitch desired. Now slowly withdraw the needle part way out, holding reel with finger so it will not turn. This will form a loop on opposite side of groove in needle.

5. Insert loose end of thread through loop, holding the reel firmly so that it will not turn. Pull awl and thread with equal force in opposite directions to form the stitch. Repeat steps 4 and 5 for the entire length of the seam.

6. To end the seam, insert awl needle through material and pull thread approximately 3 inches. Cut thread 1/2 inch from needle and pull needle from material. Tie remaining two threads together in knot.

sewing awl